Description:
The GT-EBMT Electrical Brake & Transmission Bleeding & Recovery Unit 5LT is a versatile tool designed to address issues related to soft brake/clutch pedals and prolonged operation activities. This unit facilitates efficient bleeding procedures, ensuring optimal performance of the braking and clutch systems.
Key Features:
Adjustable Bleeding Pressure:
- The factory-set pressure is 2 bar to prevent warping or deformation of master cylinder reservoirs and leakage from outer boots or dust seals.
- Hand knob allows for easy adjustment of pressure, with a clockwise (CW) turn to increase and a counterclockwise (CCW) turn to decrease pressure.
- Important: Always readjust the pressure back to the factory setting of 2 bar after any changes.
Operating Instructions:
-
Secure Fluid Container: Place a new brake fluid container on the holding platform and secure it with the hold-down chain.
-
Connect Fluid Pick-up Tube: Insert the fluid pick-up tube into the container opening, ensuring a proper seal with the seal cone.
-
Connect Pressure Hose: Attach the quick coupler of the pressure hose to the self-purging nipple.
-
Power Up: Plug the power cord into a wall outlet (230V AC, 0.1kW, 50Hz).
-
Air Purge: Run the unit for at least 30 seconds with the pressure hose connected to the self-purge nipple to eliminate air from the hose and pump. Repeat before each bleed job.
-
Master Cylinder Adapter: Connect the pressure hose to a properly installed master cylinder adapter.
-
Power On: Turn on the unit using the power switch; ensure the green light is illuminated.
-
Adjust Pressure: Set the bleeding pressure by turning the pressure regulator knob to the recommended level by the vehicle manufacturer.
-
Bleeding Process: Follow the vehicle manufacturer's procedure to bleed the system, especially when working on ABS systems.
-
Pressure Release: Before removing the pressure hose, switch off the unit to relieve pressure. Return the original master cylinder cover to the reservoir.
Technical Information:
-
Power Requirement: 230V AC, 0.1kW, 50Hz
-
Pressure Range: Factory set at 2 bar, adjustable with a range suitable for various systems.
-
Fluid Capacity: 5 liters
-
Safety Feature: Quick coupler for self-purging to eliminate air from the hose and pump.
-
Application: Suitable for ABS systems; follow manufacturer's guidelines for bleeding procedures.
-
Maintenance: Regularly check and readjust pressure settings as needed for specific bleeding tasks.
